Roof Sheeting


Pierced Fix Profiles

Classicorr

The Corrugated profile is sinusoidal and can be used as roofing and cladding material. With its origins dating back to the Victorian era, it is probably the most commonly known sheeting profile used in the world today. The fact that the corrugated profiled sheeting has been around since before the turn of the century proves that this easy to use and effective profile for roofing and wall cladding is here to stay. Classicorr is the traditional and familiar S-Rib profile for roofing and cladding applications. The S-rib is derived from the sinus curve and offers very strong structural properties. The Corrugated profile virtually eliminates oil canning and the sheeting can be factory cranked, curved and bullnosed to various radii depending on customer's requirements.

Tufdek IBR

IBR is an abbreviation for Inverted Box Rib, an angular trapezoidal fluted profile sheet with a bold appearance which makes it both attractive and practical. Tufdek has an effective covering width of 686 mm designed for use as side cladding or roofing material in commercial, industrial and residential buildings. The deep broad flute design offers excellent drainage characteristics combined with optimum weight versus load/span capabilities. Tufdek can be factory cranked, curved and bullnosed to various radii depending on customer's requirements.

Widedek

Is an angular trapezoidal fluted sheet and is similar in appearance to IBR profiled sheeting, the difference being the cover width of the sheet, and the depth of the flutes. Widedek sheeting has a cover width of 760mm and the depth of the flutes on Widedek is 28,5mm. The Widedek profile has a bigger cover width than IBR, resulting in a saving on sheeting.

Trimflute

The profile is roll-formed with 6 trapezoidal ribs at 203 mm, centres with a net cover of 1015 mm. The rib height shall be 26.5 mm and shall be fixed in accordance with the manufacturer’s recommendations.

Versatile

Versatile is a premium roofing profile from Safintra Roofing that has the appearance of tiles but the strength and light weight advantage of steel. It is available in a range of colours and in various thicknesses.

Fluteline

Fluteline is an angular trapezoidal fluted profile sheet with similar characteristics to IBR but having an effective cover of 889mm, which is wider than IBR.

Concealed Fix Profiles

Newlok

Newlok’s unique interlocking clipping system incorporates a concealed cleat to positively hold down the male-female joint at every rib. The profile can be roll-formed by a mobile mill on the building site, in continuous lengths. The two-part cleat allows for natural thermal expansion and contraction of the sheet, and the 50,8mm rib height delivers optimal water shedding capabilities at slopes as low as 1.5°.

Saflok 700

Saflok 700 is a concealed fix sheet profile with an effective cover width of 700mm. It is an angular interlocking standing seam trapezoidal rib profile, and can be roll-formed on site. Saflok 700 can be curved or bullnosed to a minimum internal radius of 450mm. Reverse cranking is not possible.

Saflok 410

Saflok 410 is a concealed fix sheet profile with an effective cover width of 410mm. It is an angular interlocking standingseam trapezoidal rib profile, and can be roll-formed on site.